Ashdown ABM C210T-500 EVO II Combo 2X10" Bass Amp

The ABM C210T-500 EVO II is a 575W RMS combo amp designed to satisfy both bass purists and tech-heads. Three rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz, and 5kHz and are supplemented by two pairs of additional sliders, providing 15dB cut and boost at 180Hz, 340Hz, 1.3kHz, and 2.6kHz. The EQ can be switched on/off and flat/shaped by footswitch, enabling you to go from a flat fretless sound to a boosted sound with ease. The single input is switchable for passive and active instruments. A blend of solid state and dual-triode tube preamp stages can be preset and selected by footswitch, providing access to a massive range of clean, warm, and overdriven tones.The footswitchable subharmonic generator tracks the main signal precisely and reproduces it an octave lower. A subharmonic level control lets you add just the right amount of low-end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone. The ABM C210T-500 EVO II combo also features a front panel-mounted balanced direct out with pre- or post-EQ switching, a sub-bass output, tuner output, FX loop, and a line input for connecting an external sampler or sound source. Output muting cuts the signal from the direct out but leaves the tuner output live, allowing silent tuning. The upgraded power section has faster transient attack, more headroom, and even less noise.Ashdown BlueLine speakers are...

Ashdown MAG 600H Bass Amp Head

Bigger brother to the MAG300 model, the Ashdown MAG 600H bass amplifier head features a potent, fan-cooled 575W RMS power section. Rotary bass, mid, and treble controls are supplemented by smaller rotary controls, providing 15dB of cut and boost at 220Hz and 1.6kHz, making it a comprehensive 5-band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to either punchy, attacking or warm, rounded sounds. For enhanced low-end response, the MAG 600H has Ashdown's acclaimed subharmonic generator, so it's ready to take your tone on a deep dive. Inputs are provided for active and passive instruments, and the front panel also features an effects send and return, a tuner/line output, and a balanced DI output for direct connection to a mixing console.

Ashdown MAG C410T-300 Combo Bass Amp

The C410T-300 combo features a potent, fan-cooled 307W RMS power section, 4 - 10" Ashdown BlueLine speakers and a tweeter for the high frequencies. Rotary bass, mid, and treble controls are supplemented by smaller rotary controls, providing 15dB of cut and boost at 220Hz and 1.6kHz, making it a comprehensive 5-band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to either attacking or warm, rounded sounds. For enhanced low-end response, the C410T-300 has Ashdown's acclaimed subharmonic generator ready to take your tone on a deep dive. Inputs are provided for active and passive instruments and the front panel also features an effects send and return, a tuner/line output, and a balanced DI output for direct connection to a mixing console.Ashdown BlueLine speakers achieve a superb balance of power, transparency, and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in modern bass sound.

Ashdown MAG C210T-300 Combo Bass Amp

The C210T-300 Combo features a potent, fan-cooled 307W RMS power section, 2 - 10" Ashdown BlueLine speakers, and a tweeter for the high frequencies. Rotary bass, mid, and treble controls are supplemented by smaller rotary controls, providing 15dB of cut and boost at 220Hz and 1.6kHz, making it a comprehensive 5-band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to either attacking or warm, rounded sounds. For enhanced low-end response, the C210T-300 has Ashdown's acclaimed subharmonic generator ready to take your tone on a deep dive. Inputs are provided for active and passive instruments, and the front panel also features an effects send and return, a tuner/line output, and a balanced DI output for direct connection to a mixing console.Ashdown BlueLine speakers achieve a superb balance of power, transparency, and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in modern bass sound.

Ashdown MAG C115-300 Combo Bass Amp

The MAG C115-300 Combo features a potent, fan-cooled 307W RMS power section and a 15" Ashdown BlueLine speaker. Rotary bass, mid, and treble controls are supplemented by smaller rotary controls providing 15dB of cut and boost at 220Hz and 1.6kHz, making it a comprehensive 5-band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to either attacking or warm, rounded sounds. For enhanced low-end response, the MAG C115-300 has Ashdown's acclaimed sub-harmonic generator ready to take your tone on a deep dive. Inputs are provided for active and passive instruments and the front panel also features an effects send and return, a tuner/line output and a balanced DI output for direct connection to a mixing console.Ashdown BlueLine speakers achieve a superb balance of power, transparency and deep, controlled low end, without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.

Ashdown MAG 300R 300 Watt Bass Amp Head

Little brother to the MAG 600R model, the MAG 300R rackmountable amplifier head features a potent, fan-cooled 307W RMS power section. Rotary bass, mid, and treble controls are supplemented by smaller rotary controls, providing 15dB of cut and boost at 220Hz and 1.6kHz, making it a comprehensive 5-band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to either attacking or warm, rounded sounds. For enhanced low-end response, the MAG 300R has Ashdown's acclaimed subharmonic generator, so it's ready to take your tone on a deep dive. Inputs are provided for active and passive instruments, and the front panel also features an effects send and return, a tuner/line output, and a balanced DI output for direct connection to a mixing console.

Ashdown Electric Blue 12-180 Combo Bass Amp

The Electric Blue 180 head produces 180 watts of Ashdown goodness via a fan-cooled, fast-transient power stage. The preamp section boasts active/passive instrument inputs, a VU-style LED input meter, 5-band EQ with Bright and Deep switches, front panel-mounted DI output, FX loop, and tuner/line out. The mighty Ashdown subharmonic generator tracks the main signal and reproduces it an octave lower, and the level control lets you to add just the right amount of low-end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone.A 12", high- performance Ashdown BlueLine bass driver ensures exceptional attack, clarity, and low-end performance, while the extension speaker output can be used to connect an additional cabinet for use in larger venues. The cabinet is finished in a tough, scuff-proof carpet covering with protective corners and a kick-proof metal grille.

Ashdown ABM C410T-500 EVO II Combo 4X10" Bass Amp

The ABM C410T-500 EVO II is a 575W RMS combo amp designed to satisfy bass purists and tech-heads alike. Three rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz, and 5kHz and are supplemented by two pair of additional sliders, providing 15dB cut and boost at 180Hz, 340Hz, 1.3kHz, and 2.6kHz. The EQ can be switched on/off and flat/shaped by footswitch, enabling you to go from a flat fretless sound to a boosted sound with ease. The single input is switchable for passive and active instruments. A blend of solid state and dual-triode tube preamp stages can be preset and selected by footswitch, providing access to a massive range of clean, warm, and overdriven tones.The footswitchable subharmonic generator tracks the main signal precisely and reproduces it an octave lower. A subharmonic level control lets you add just the right amount of low-end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone. The ABM C410T-500 EVO II Combo also features a front panel-mounted balanced direct out with pre- or post-EQ switching, a sub-bass output, tuner output, FX loop, and a line input for connecting an external sampler or sound source. Output muting cuts the signal from the direct out but leaves the tuner output live, allowing silent tuning. The upgraded power section has faster transient attack, more headroom, and even less noise.Ashdown BlueLine speakers are...

Ashdown Electric Blue 15-180 Bass Combo Amp

The Electric Blue 180 head produces 180 watts of Ashdown goodness via a fan-cooled, fast-transient power stage. The preamp section boasts active/passive instrument inputs, a VU-style LED input meter, 5-band EQ with Bright and Deep switches, front panel-mounted DI output, FX loop, and tuner/line out. The mighty Ashdown subharmonic generator tracks the main signal and reproduces it an octave lower, and the level control lets you add just the right amount of low- end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone.A 15" high- performance Ashdown BlueLine bass driver ensures exceptional attack, clarity, and low-end performance, while the extension speaker output can be used to connect an additional cabinet for use in larger venues. The cabinet is finished in a tough, scuff-proof carpet covering with protective corners and a kick-proof metal grille.

Ashdown ABM C115-500 EVO II Combo 15" Bass Amp

The ABM C115-500 EVO II is a 575W RMS combo amp designed to satisfy both bass purists and tech-heads. Three rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz, and 5kHz and are supplemented by two pairs of additional sliders, providing 15dB cut and boost at 180Hz, 340Hz, 1.3kHz, and 2.6kHz. The EQ can be switched on/off and flat/shaped by footswitch, enabling you to go from a flat fretless sound to a boosted sound with ease. The single input is switchable for passive and active instruments. A blend of solid state and dual-triode tube preamp stages can be preset and selected by footswitch, providing access to a massive range of clean, warm, and overdriven tones.The footswitchable subharmonic generator tracks the main signal precisely and reproduces it an octave lower. A subharmonic level control lets you to add just the right amount of low-end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone. The ABM C115-500 EVO II Combo also features a front panel-mounted balanced direct out with pre- or post-EQ switching, a sub-bass output, tuner output, FX loop, and a line input for connecting an external sampler or sound source. Output muting cuts the signal from the direct out but leaves the tuner output live, allowing silent tuning. The upgraded power section has faster transient attack, more headroom, and even less noise.Ashdown BlueLine speakers are...

Ashdown ABM RPM-1 EVO II Rackmount Bass Preamplifier

The ABM RPM-1 EVO II is a rackmountable bass preamp designed to satisfy both bass purists and tech-heads alike. Three rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz, and 5kHz, supplemented by two pairs of additional sliders, giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz, and 2.6kHz. The EQ can be switched on/off and flat/shaped by footswitch, enabling you to go from a flat fretless sound to a boosted sound with ease. The single input is switchable for passive and active instruments. A blend of solid state and dual-triode tube preamp stages can be preset and selected by footswitch, providing access to a massive range of clean, warm, and overdriven tones.The footswitchable subharmonic generator tracks the main signal precisely and reproduces it an octave lower. A subharmonic level control lets you add just the right amount of low-end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone. The ABM RPM-1 EVO II also features a front panel-mounted balanced direct out with pre- or post-EQ switching, a sub-bass output, tuner output, FX loop, and a line input for connecting an external sampler or sound source. Output muting cuts the signal from the direct out but leaves the tuner output live, allowing silent tuning. The upgraded power section has faster transient attack, more headroom, and even less noise.

Ashdown AL-MK500 Mark King Signature Rackmount Bass Amp Head

Ashdown Labs worked in consultation with Mark to build an amplifier that met his requirements for absolute fidelity and clarity, precision tone shaping, and massive power on tap for stunning dynamics. The result is the AL-MK500, a 575W RMS funk powerhouse with low-impedance instrument input, illuminated VU meter, Harmonic Emphasis, 12-band graphic EQ, switchable pre- and post-EQ balanced direct output, tuner output with mute switch, line output, effects loop, and speaker outputs on jack and Speakon connectors. Rackmountable (2RU).

Ashdown ABM 300 EVO II Mono Bass Amp Head

The ABM 300 EVO II is a 325W RMS bass amp head designed to satisfy both bass purists and tech-heads alike. Three rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched on/off and flat/shaped by footswitch, enabling you to go from a flat fretless sound to a boosted sound with ease. The single input is switchable for passive and active instruments. A blend of solid state and dual-triode tube preamp stages can be preset and selected by footswitch, providing access to a massive range of clean, warm, and overdriven tones.The footswitchable subharmonic generator precisely tracks the main signal and reproduces it an octave lower. A subharmonic level control lets you add just the right amount of low-end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone. The ABM 325 EVO II also features a front panel-mounted balanced direct out with pre- or post-EQ switching, a sub-bass output, tuner output, FX loop, and a line input for connecting an external sampler or sound source. Output muting cuts the signal from the direct out but leaves the tuner output live, allowing silent tuning. The upgraded power section has faster transient attack, more headroom, and even less noise.

<< Previous    [1]  2    Next >>