Ampeg SVT-210HE Classic Series Bass Cabinet

Solid Ampeg sonics for that classic, punchy bass sound.

Ampeg SVT-410HLF Classic Series Bass Cabinet

The Ampeg SVT-410HLF Enclosure gives you plenty of volume and clean low end. This 4x10" cabinet has the same speakers and 1" horn as the SVT-410HE with 2" coils and 30 oz. magnets, but the cabinet itself is tuned differently. It's deeper and has a bottom port that results in better low-end response, down to 28Hz! 30"W x 24"H x 19"D. 110 lbs.

Ampeg PB-210H PortaBass Cab

Vertical cab houses 2 neodymium magnet woofers for a combination of lighter weight and higher volume output. A horn enhances articulation. The cab is constructed of Italian poplar plywood that offers lighter weight and greater resonance. A removable telescoping handle lets you load and roll to the stage. HF variable L-pad control, 1/4" and Neutrik Speakon connectors.

Ampeg SVT-CL Classic Bass Head

The reissue Ampeg SVT-CL Classic Bass Head brings back in all its glory a classic big stage amp that was the choice of players in the '60s. There's no question that the SVT-CL delivers 300W (to either 2 or 4 ohms). Its tube array includes 2 - 12AX7s in the preamp, 2 - 12AU7s and a 12AX7 for drivers, and six - 6550s for power. Controls include 3 bands of tone, a 5-way mid selector, plus ultralow and high boosts. Other pro features on the Ampeg SVT-CL Bass Head include normal and padded inputs, tube protection circuitry, auto-fault mode, fan cooling, slave output jack, 4/2 ohm selector, user biasing controls, and 3-position AC polarity switch. 24 W x 11-1/2"H x 13"D. 80 lbs.

Ampeg BSE-115 200 Watt 1x15" Bass Cab

Ampeg's most affordable enclosure has all the premium American-made components and features of other Ampeg enclosures. 123dB maximum SPL.

Ampeg BA500 500 Watt 2x10 Bass Combo Amp

The Ampeg BA500 500 Watt 2x10 Bass Combo Amp delivers 350W used alone, or up to 500W with an extension cab. 2 custom 10" drivers and a 1" compression horn deliver punch and definition. Graphic EQ, balanced line out, mute switch with tuner out, tilt-back design, and defeatable limiter. Ultra Mid tone control for instant sound shaping. Line out with selectable level.

Ampeg SVT450H 450W Classic Series Head

The Ampeg SVT450H 450W Classic Series Head has authentic vintage Ampeg tube sound with the Classic series look. 450W MOSFET output provides the most tube-like feel of any amp in its class. Optocoupler limiter circuit maximizes clean acoustic output and crunches a little when defeated. 3-band EQ plus 9-band graphic EQ. Pre/post EQ XLR line out, line out level select, input pad, variable speed fan.

Ampeg SVPCL Classic Bass Preamp

The Ampeg SVPCL Classic Bass Preamp is an all-tube preamp section of the SVT Classic head. Ampeg gives you 3 bands of EQ, 5-position midrange and ultralow selector, tuner out, balanced line out, and pre/post EQ line out with the SVPCL Classic Bass Preamp.

Ampeg B-15R Diamond Blue Series Amp

It has the same flip top as the original. It has the same blue diamond covering. And it has the same signature sound as one of the tidiest, coolest combos of all time. 100W of power (60W in low-power mode) drives a 15" speaker with a tweeter for added edge. Quick, easy tone shaping is provided by a 5-position mid-switch and 3 tone controls. Updated features include a balanced line out and a preamp out/power amp in. Play this amp and relive the glory days of the 60s. 24" x 33" x 16.5". 117 lbs.

Ampeg SVT18 Cabinet

Massive chest-thumping bass is a lock everytime you haul the Ampeg SVT18 Cabinet onstage. Its 18" cast-frame driver thickens the plot with a 109 oz. magnet and a 4" voice coil. Surprisingly versatile cab boasts a frequency response of (-3dB) 35Hz-2kHz. 1,000W program, 500W RMS handling.

Ampeg AFP2 Footswitch

2-button footswitch with TRS cable. Works with the following Ampeg amps: SVT2PRO, SVPPRO, SVT3PRO, BA210SP Combo, and BA115SP Combo.

Ampeg PB212H 400W 2x12" Bass Cabinet

The PortaBass PB2121H cab is designed to combine tone and clarity with portability. Lightweight plywood cab construction and neodymium speaker magnet technology both contribute to reduced weight, while a removable telescoping handle and easy-glide casters let you manuever it from the car into the club without the heavy lifting bass players often deal with.

Ampeg BXT210M 400W 2 x 10" Bass Cabinet

BXT enclosures feature American-made, custom cast-frame drivers, and 1" compression drivers for the horns. The crossover was designed to smoothly reproduce the mids and highs for a focused, naturally-scooped tone. Front-shelf ports produce extended low frequencies eliminating the need for additional cabinets. 1/4" and Neutrik Speakon connectors plus high-frequency protection.

Ampeg SVP-Pro Series Bass Preamp

The Ampeg SVP-Pro Series Bass Preamp uses 5 - 12AX7 tubes to provide the true, rich, tubular tone only a genuine multivalve signal path can generate. Tube Drive Control gives you precision command over just how hot those babies burn. Input peak LED, input pad and bright switch, mute function (to avoid those annoying clicks when you switch instruments mid-song), balanced line out, effects loop, 3 EQ knobs, nine-band graphic EQ, and tuner out give you all the pro flexibility you expect from Ampeg. 19"W x 1.75"H x 10"D. 9 lbs.

Ampeg BA-210 Bass Combo Amp

The Ampeg BA-210 Bass Combo Amp is compact, easy to transport, and puts out the sound. 220W of unbridled power, a piezo tweeter, and two crankin' 10" drivers with massive magnets bring all that fat tone into the real world. Sturdy birch cab.

Ampeg BA-210SP Bass Combo Amp with Effects

The Ampeg BA-210SP Bass Combo Amp with Effects gives you 16 preset effects from overdrive to funk wah. Its bass synths give you vintage feel with a whole lot of room to mess around with your sound. Footswitch clicks among 4 preset picks. 220 watts of unbridled power, a piezo tweeter, and 2 crankin' 10" drivers with massive magnets bring all that fat tone into the real world.

Ampeg SVT-610HLF Bass Cabinet

The Ampeg SVT-610HLF 6x10 Bass Cabinet provides all the soul-stirring, breath-stopping punch and moan you need to hold down the bottom end. The bass guitar cab has 6 - 10" bass drivers with 30-oz. magnets and 2" voice coils, plus a 10-oz. horn with 1" coil to bring out the funky string snaps. Variable-level attenuator and resistive bulb wired in series with the horn to prevent damage. The SVT-610HLF also has rear skid rails for better protection and easier loading. 600W RMS and 1,200W program handling. 4 ohms impedance, 42Hz usable low frequency. 24"W x 40"H x 16"D. 115 lbs.

Ampeg BA115 Bass Combo

The Ampeg BA115 Bass Amp Series Combo, a member of Ampeg's starter series, has simple, clean looks and easy controls. The BA115 delivers 100W of power to a single 15" speaker. It provides simple 3-band tone controls, plus a "style selector" with 5 basic tone options. Other features include master and gain controls, a balanced line out (XLR), headphone jacks, and RCA inputs for connecting a CD or tape player. As a handy stage feature, the cabinet tilts back.

Ampeg BA112 50W Single 12 Bass Combo

Delivers 50W of power to a single 12" speaker. It offers simple 3-band tone controls, plus a "style selector with 5 basic tone options. Other features include master and gain controls, a balanced line out (XLR), headphone jacks, and RCA inputs for connecting a CD or tape player. As a handy stage feature, the cabinet tilts back.

Ampeg B115E 1X15 Speaker Cabinet

The B115E bass speaker cabinet delivers classic Ampeg tone through a single 15" Ampeg driver. Front tuned ports ensure solid low-end response. Nickel corners protect against damage. Casters and spring-loaded handles make it a breeze to move around. 200W RMS/400W peak power handling.

Ampeg SVP1600 1200W Bass Power Amp

The Ampeg SVP1600 1200W Bass Power Amp is the MOSFET power section of the legendary Ampeg SVT-4 PRO. The Ampeg SVP1600 is a 3-space rackmount power amp that outputs 1200W RMS, 1600W peak @ 4 ohms mono- bridged. The inputs are standard 1/4" and the speaker outputs are both 1/4" and Speakon. Parallel line out jacks for output to another amp. Separate volume controls for channels A and B. Ampeg includes a built-in limiter with defeat switch in the SVP1600 Bass Power Amp.