Ampeg B-100R Bass Combo Amp
The Ampeg B-100R Bass Combo Amp has the same warm tone and simple controls that made the Portaflex Ampegs of the 60s so popular, but it's solid-state for lighter weight and optimum reliability. 100W of power push a single vintage 15" driver. Blue Diamond covering gives it the classic Ampeg look of the 60s.Don't forget the optional casters! Ampeg BA115HP 220 Watt 1x15 Bass Series Combo Amp
Simple and to the point, the BA115HP has a 220W power section, custom 15" woofer, and 1" compression tweeter with a variable pad to adjust the crossover level. The straightforward-yet-effective EQ controls deliver lots of tonal flexibility, especially in conjunction with the Style response control. An XLR direct out allows patching to a mixing board or recording console while the built-in digital chromatic tuner and mute switch make it easy to tune silently. Ampeg SVT-6PRO 1100 Watt Tube/Solid State Bass Head
The SVT-6PRO features a total of 6 tubes in the preamp and driver stages for tone shaping. The 4-band semi- parametric EQ section offers +/-18dB of adjustment per band selection for fine tuning critical frequencies. The power section delivers 1,100W of power at 4 ohms. It also features onboard compression at the input stage, and a tube voltage control to adjust the response of the power amp driver tubes. Ampeg PBC-228 PortaBass 2 x 8 200W Bass Combo Amp
The Ampeg PBC-228 PortaBass 2 x 8 200W Bass Combo Amp features the patented Micro-Dynamic Technology (MDT) power amp circuitry. This technology eliminates bulky heatsinks and large fans because it is hyper-efficient, resulting in a svelte, 35-pound performer with plenty of output. Dual EQs, direct out, and versatile effects routing make the Ampeg PortaBass bass combo amp versatile in the studio as well as onstage. Ampeg B2RE Rack Bass Head
The Ampeg B2RE Rack Bass Head cranks out 450W of solid state thunder at 4 ohms, 250W at 8 ohms. 3-band rotary and 9-band graphic equalizers let you hone in on the perfect sound for your style. 1/4" and Neutrik Speakon speaker outputs, XLR balanced line out, preamp out/power amp in jacks, and effects loop. And don't forget that killer Ampeg tone! Ampeg B1RE 300W Solid State Bass Head
The Ampeg B1RE 300W Solid State Bass Head offers you bass players the power and response of the Pro Series in a reliable, all solid-state format. It has an XLR balanced line out, MOSFET power amp, optocoupler limiter, and effects loop. The Ampeg B1RE Bass Amp Head features a solid 300W of output @ 4 ohms, 3-band EQ, and preamp out/power amp in jacks. Ampeg B500DR Bass Head
The Ampeg B500DR bass head uses a digital "front end" to remember your analog amp settings. This solid-state head has 350W output at 4 ohms and 500W at 2 ohms. Its 4 memory locations store your amp settings, remembering the settings for gain, EQ, effects blend, even which input you use! It's perfect for players who bring more than one bass to the gig. Dial in and save the perfect sound for each instrument and choose them with a button push. Even with one bass, the B500DR lets you automatically call up settings for R&B, rock 'n' roll, jazz, or funk. Each of the memory location is also footswitchable with the included 4-button footswitch. Ampeg SVT1000 Bass Head
The Ampeg SVT1000 Bass Head is a 1,000W (at 4 ohms) solid state bass amplifier head featuring a 9-band graphic EQ in addition to a 3-band parametric. The Ampeg SVT1000 also features a 5-way switch for instant EQ shifts in the midrange frequencies. Built-in limiter with a defeat switch. Bass amp head back panel has both Neutrik Speakon and 1/4" speaker outs. Ampeg SVT-410HE Bass Enclosure
4 x 10" speakers with 2" coils and 30 oz. magnets. To enhance these is an added 1" horn. The cab handles 400W RMS and 800W program. 25" x 24" x 16". 91 lbs. Ampeg SVT-810E Bass Enclosure
Decades of pro musicians don't lie, the Ampeg SVT-810E Bass Enclosure will rattle your foundation. 8 - 10" speakers produce an incredible wall-of-sound! Fidelity is enhanced by the fact that each pair of speakers is in a separate internal cabinet, which prevents standing wave interference. 800W RMS handling capability. 1,600W program handling. 4-ohm nominal impedance. Ampeg B1RE Bass Head and B410HE 4x10" Half StackB1RE Bass Head & B410HE Half Stack
Includes the B1RE bass head and B410HE 4x10 cab. Ampeg SVT-2 Pro Series Amp Head
The Ampeg SVT-2 Pro Series Amp Head is a shining example of Ampeg's attention to quality and detail. You know it's right when the sound you hear matches the sound in your imagination. For over 5 decades, Ampeg has been helping bass players reach that place where it all comes together. 5 - 12AX7 tubes in the SVT-2 Pro Head provide you with gobs of tone, texture, and gain, while the six - 6550s launch 300 heart-thumping watts into the air. Flexible EQ including 3 tone controls, a 5-position midband frequency control, and a nine-band graphic equalizer work together to help you shape the tone you demand from your gear. The 1/4" thick extruded aluminum front panel not only look good, it is essential for safe racking. With the power and flexibility of the Ampeg SVT-2 Pro Amp Head, your creative mind has the palette to deliver the goods! Ampeg PB800 Portabass 800W Bass Head
Designed with the working bassist in mind. It has the power and other features needed for pro bass performance and weighs only 20 lbs., making it one of the lightest in its power range. It has 2 channels with separate 3-band EQs that include sweepable mids, ultralow and high boosts, balanced line out, and an effects loop with blend control. Power is rated at 800W @ 2 ohms, 550W @ 4 ohms, and 300W @ 8 ohms. Rackmountable. Ampeg B410HE 4X10 Speaker Cabinet
The B410HE bass speaker cabinet delivers classic Ampeg tone through 4 - 10" Ampeg drivers. A 1" horn handles the highs, with a 3-position attenuator controlling the mix. Nickel corners protect against damage. Casters and spring-loaded handles make it a breeze to move around. 200W RMS/400W peak power handling. Ampeg B410HLF 4X10 Speaker Cabinet
The B410HLF bass speaker cabinet delivers classic Ampeg tone through 4 - 10" Ampeg drivers. A 1" horn handles the highs, with a 3-position attenuator controlling the mix. Nickel corners protect against damage. Casters and spring- loaded handles make it a breeze to move around. 200W RMS/400W peak power handling. Front, shelf-style port expands the low-frequency response. Ampeg SVT12HE 1X12" Bass Speaker Cabinet
The SVT12HE high-output bass enclosure brings Ampeg's signature tone and power to the stage or rehearsal space with a compact design. The SVT12HE delivers 300 watts RMS of power handling and 123dB of SPL thanks to a front ported baffle and custom-designed 12" driver. Its compact enclosure weighs in at 46 pounds and measures only 21W x 15"H x 16"D. Like all Classic Series enclosure, the SVT12HE is constructed of rugged Baltic birch plywood for structural integrity and maximum tonality. Ampeg PR-410HLF Pro Series Extended Range Bass Cabinet
The Ampeg PR-410HLF Pro Series 4x10 Ext Range Cabinet Speaker is designed for the highest fidelity reproduction. High power handling, flat response, and incredible construction in a great-looking enclosure. Features cast frame drivers, high-frequency horns with variable level attenuators and light bulb protection, thirteen-ply 3/4" Baltic birch plywood cabinets, multi-coat urethane polymer finish/sealant, sixteen-gauge steel grilles, edge-armor corner protection, 12dB/octave crossovers, Neutrik Speakons, and 1/4" inputs.
| ||
______________________________________________________________________________________
|
